Jackco Model 66200B Manual do Utilizador descarregar pdf (Página 5)

Important:

The greatest single cause of failure in hydraulic units is dirt. Keep the

service jack clean and well lubricated to prevent foreign objects from entering the

system. If the jack has been exposed to rain, snow, sand or grit, it must be cleaned

before use.

1. Store the jack in a well-protected area where it will not be exposed to corrosive

vapors, abrasive dust, or any other harmful elements.

2. Regularly lubricate the moving parts in the wheels, arms, handle and pump roller pin.

3. Replace the hydraulic uid in the reservoir at least once per year. To check the

hydraulic uid level, lower the lifting arm completely. Remove the rubber ller plug

from the power unit. The hydraulic uid level should be just below the ller plug. If

necessary, add hydraulic uid, and reinstall the rubber ller plug.

Important: The use of alcohol in hydraulic brake uid could damage the seals

and result in jack failure.

4. Inspect the jack before each use. Take corrective action if any of the following

problems are found:

a. Cracked, damaged, other damage. d. Scored, damaged piston rod

b.Excessive wear, bending, other damage e. Loose hardware

c. Leaking hydraulic uid f. Modied equipment

5.Keep warning labels and instructional decals clean and readable. You may use a

mild soap solution to wash external surfaces of the jack.

PREVENTIVE MAINTENANCE

1 2 3 4 5 6 7 8

Sem comentários

Jackco Model 66200B Manual do Utilizador Página 5